noch ein USB-Problem

20/06/2009 - 10:40 von Walter Mautner | Report spam
Da hab ich ein dolles neues Ubuntu 9.10 mit 2.6.30-9 Kernel (64bit) und nun
das:

root@woodpecker:/home/walter# lsusb (vor Anschluß der USB-Pladde)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@woodpecker:/home/walter# lsusb (_kurz_ nach Anschluß)
Bus 001 Device 003: ID 152d:2329 JMicron Technology Corp. / JMicron USA
Technology Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@woodpecker:/home/walter# lsusb (gleich darauf, Abfrage hàngt ein paar
Sekunden)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg sagt:

[ 1065.093075] usb 1-4: new high speed USB device using ehci_hcd and address
3
[ 1065.226625] usb 1-4: configuration #1 chosen from 1 choice
[ 1065.325218] Initializing USB Mass Storage driver...
[ 1065.329204] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1065.329616] usb-storage: device found at 3
[ 1065.329624] usb-storage: waiting for device to settle before scanning
[ 1065.329654] usbcore: registered new interface driver usb-storage
[ 1065.329662] USB Mass Storage support registered.
[ 1070.329042] usb-storage: device scan complete
[ 1070.402749] scsi 6:0:0:0: Direct-Access SAMSUNG HM500LI
PQ: 0 ANSI: 2 CCS
[ 1070.403550] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 1070.412699] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1070.415370] sd 6:0:0:0: [sde] Write Protect is off
[ 1070.415382] sd 6:0:0:0: [sde] Mode Sense: 34 00 00 00
[ 1070.415388] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418321] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418329] sde: sde1
[ 1070.479571] sd 6:0:0:0: [sde] Attached SCSI disk
[ 1070.893064] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.101016] usb 1-4: device descriptor read/64, error -71
[ 1071.413057] usb 1-4: device descriptor read/64, error -71
[ 1071.629053] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.837056] usb 1-4: device descriptor read/64, error -71
[ 1072.149043] usb 1-4: device descriptor read/64, error -71
[ 1072.365040] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1072.837029] usb 1-4: device not accepting address 3, error -71
[ 1072.949047] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1073.422017] usb 1-4: device not accepting address 3, error -71
[ 1073.422112] usb 1-4: USB disconnect, address 3
[ 1073.537048] usb 1-4: new high speed USB device using ehci_hcd and address
4
[ 1073.745050] usb 1-4: device descriptor read/64, error -71
[ 1074.057127] usb 1-4: device descriptor read/64, error -71
[ 1074.273048] usb 1-4: new high speed USB device using ehci_hcd and address
5
[ 1074.477053] usb 1-4: device descriptor read/64, error -71
[ 1074.785052] usb 1-4: device descriptor read/64, error -71
[ 1075.001052] usb 1-4: new high speed USB device using ehci_hcd and address
6
[ 1075.465024] usb 1-4: device not accepting address 6, error -71
[ 1075.577045] usb 1-4: new high speed USB device using ehci_hcd and address
7
[ 1076.045054] usb 1-4: device not accepting address 7, error -71
[ 1076.045091] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1076.503968] usb 2-4: new full speed USB device using ohci_hcd and address
3
[ 1076.685064] usb 2-4: device descriptor read/64, error -62
[ 1076.969068] usb 2-4: device descriptor read/64, error -62
[ 1077.249072] usb 2-4: new full speed USB device using ohci_hcd and address
4
[ 1077.429063] usb 2-4: device descriptor read/64, error -62
[ 1077.713060] usb 2-4: device descriptor read/64, error -62
[ 1077.993042] usb 2-4: new full speed USB device using ohci_hcd and address
5
[ 1078.401051] usb 2-4: device not accepting address 5, error -62
[ 1078.577457] usb 2-4: new f[ 1065.093075] usb 1-4: new high speed USB
device using ehci_hcd and address 3
[ 1065.226625] usb 1-4: configuration #1 chosen from 1 choice
[ 1065.325218] Initializing USB Mass Storage driver...
[ 1065.329204] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1065.329616] usb-storage: device found at 3
[ 1065.329624] usb-storage: waiting for device to settle before scanning
[ 1065.329654] usbcore: registered new interface driver usb-storage
[ 1065.329662] USB Mass Storage support registered.
[ 1070.329042] usb-storage: device scan complete
[ 1070.402749] scsi 6:0:0:0: Direct-Access SAMSUNG HM500LI
PQ: 0 ANSI: 2 CCS
[ 1070.403550] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 1070.412699] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1070.415370] sd 6:0:0:0: [sde] Write Protect is off
[ 1070.415382] sd 6:0:0:0: [sde] Mode Sense: 34 00 00 00
[ 1070.415388] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418321] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418329] sde: sde1
[ 1070.479571] sd 6:0:0:0: [sde] Attached SCSI disk
[ 1070.893064] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.101016] usb 1-4: device descriptor read/64, error -71
[ 1071.413057] usb 1-4: device descriptor read/64, error -71
[ 1071.629053] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.837056] usb 1-4: device descriptor read/64, error -71
[ 1072.149043] usb 1-4: device descriptor read/64, error -71
[ 1072.365040] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1072.837029] usb 1-4: device not accepting address 3, error -71
[ 1072.949047] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1073.422017] usb 1-4: device not accepting address 3, error -71
[ 1073.422112] usb 1-4: USB disconnect, address 3
[ 1073.537048] usb 1-4: new high speed USB device using ehci_hcd and address
4
[ 1073.745050] usb 1-4: device descriptor read/64, error -71
[ 1074.057127] usb 1-4: device descriptor read/64, error -71
[ 1074.273048] usb 1-4: new high speed USB device using ehci_hcd and address
5
[ 1074.477053] usb 1-4: device descriptor read/64, error -71
[ 1074.785052] usb 1-4: device descriptor read/64, error -71
[ 1075.001052] usb 1-4: new high speed USB device using ehci_hcd and address
6
[ 1075.465024] usb 1-4: device not accepting address 6, error -71
[ 1075.577045] usb 1-4: new high speed USB device using ehci_hcd and address
7
[ 1076.045054] usb 1-4: device not accepting address 7, error -71
[ 1076.045091] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1076.503968] usb 2-4: new full speed USB device using ohci_hcd and address
3
[ 1076.685064] usb 2-4: device descriptor read/64, error -62
[ 1076.969068] usb 2-4: device descriptor read/64, error -62
[ 1077.249072] usb 2-4: new full speed USB device using ohci_hcd and address
4
[ 1077.429063] usb 2-4: device descriptor read/64, error -62
[ 1077.713060] usb 2-4: device descriptor read/64, error -62
[ 1077.993042] usb 2-4: new full speed USB device using ohci_hcd and address
5
[ 1078.401051] usb 2-4: device not accepting address 5, error -62
[ 1078.577457] usb 2-4: new full speed USB device using ohci_hcd and address
6
[ 1078.985037] usb 2-4: device not accepting address 6, error -62
[ 1078.985070] hub 2-0:1.0: unable to enumerate USB device on port 4
ull speed USB device using ohci_hcd and address 6
[ 1078.985037] usb 2-4: device not accepting address 6, error -62
[ 1078.985070] hub 2-0:1.0: unable to enumerate USB device on port 4

Das heißt, die Platte wird zuerst noch erkannt und sogar (sde1) die
Partition noch angezeigt, aber dann verschwindet das Geràt ...

Mit einem 2.6.25er Kernel und Mandriva (32bit) làuft es aber. An denselben
Anschlüssen. Kernelbug?
 

Lesen sie die antworten

#1 Anonymous
20/06/2009 - 18:15 | Warnen spam
Walter Mautner wrote:
Da hab ich ein dolles neues Ubuntu 9.10 mit 2.6.30-9 Kernel (64bit) und nun
das:

:/home/walter# lsusb (vor Anschluß der USB-Pladde)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
:/home/walter# lsusb (_kurz_ nach Anschluß)
Bus 001 Device 003: ID 152d:2329 JMicron Technology Corp. / JMicron USA
Technology Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
:/home/walter# lsusb (gleich darauf, Abfrage hàngt ein paar
Sekunden)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg sagt:

[ 1065.093075] usb 1-4: new high speed USB device using ehci_hcd and address
3
[ 1065.226625] usb 1-4: configuration #1 chosen from 1 choice
[ 1065.325218] Initializing USB Mass Storage driver...
[ 1065.329204] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1065.329616] usb-storage: device found at 3
[ 1065.329624] usb-storage: waiting for device to settle before scanning
[ 1065.329654] usbcore: registered new interface driver usb-storage
[ 1065.329662] USB Mass Storage support registered.
[ 1070.329042] usb-storage: device scan complete
[ 1070.402749] scsi 6:0:0:0: Direct-Access SAMSUNG HM500LI
PQ: 0 ANSI: 2 CCS
[ 1070.403550] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 1070.412699] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1070.415370] sd 6:0:0:0: [sde] Write Protect is off
[ 1070.415382] sd 6:0:0:0: [sde] Mode Sense: 34 00 00 00
[ 1070.415388] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418321] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418329] sde: sde1
[ 1070.479571] sd 6:0:0:0: [sde] Attached SCSI disk
[ 1070.893064] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.101016] usb 1-4: device descriptor read/64, error -71
[ 1071.413057] usb 1-4: device descriptor read/64, error -71
[ 1071.629053] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.837056] usb 1-4: device descriptor read/64, error -71
[ 1072.149043] usb 1-4: device descriptor read/64, error -71
[ 1072.365040] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1072.837029] usb 1-4: device not accepting address 3, error -71
[ 1072.949047] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1073.422017] usb 1-4: device not accepting address 3, error -71
[ 1073.422112] usb 1-4: USB disconnect, address 3
[ 1073.537048] usb 1-4: new high speed USB device using ehci_hcd and address
4
[ 1073.745050] usb 1-4: device descriptor read/64, error -71
[ 1074.057127] usb 1-4: device descriptor read/64, error -71
[ 1074.273048] usb 1-4: new high speed USB device using ehci_hcd and address
5
[ 1074.477053] usb 1-4: device descriptor read/64, error -71
[ 1074.785052] usb 1-4: device descriptor read/64, error -71
[ 1075.001052] usb 1-4: new high speed USB device using ehci_hcd and address
6
[ 1075.465024] usb 1-4: device not accepting address 6, error -71
[ 1075.577045] usb 1-4: new high speed USB device using ehci_hcd and address
7
[ 1076.045054] usb 1-4: device not accepting address 7, error -71
[ 1076.045091] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1076.503968] usb 2-4: new full speed USB device using ohci_hcd and address
3
[ 1076.685064] usb 2-4: device descriptor read/64, error -62
[ 1076.969068] usb 2-4: device descriptor read/64, error -62
[ 1077.249072] usb 2-4: new full speed USB device using ohci_hcd and address
4
[ 1077.429063] usb 2-4: device descriptor read/64, error -62
[ 1077.713060] usb 2-4: device descriptor read/64, error -62
[ 1077.993042] usb 2-4: new full speed USB device using ohci_hcd and address
5
[ 1078.401051] usb 2-4: device not accepting address 5, error -62
[ 1078.577457] usb 2-4: new f[ 1065.093075] usb 1-4: new high speed USB
device using ehci_hcd and address 3
[ 1065.226625] usb 1-4: configuration #1 chosen from 1 choice
[ 1065.325218] Initializing USB Mass Storage driver...
[ 1065.329204] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1065.329616] usb-storage: device found at 3
[ 1065.329624] usb-storage: waiting for device to settle before scanning
[ 1065.329654] usbcore: registered new interface driver usb-storage
[ 1065.329662] USB Mass Storage support registered.
[ 1070.329042] usb-storage: device scan complete
[ 1070.402749] scsi 6:0:0:0: Direct-Access SAMSUNG HM500LI
PQ: 0 ANSI: 2 CCS
[ 1070.403550] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 1070.412699] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1070.415370] sd 6:0:0:0: [sde] Write Protect is off
[ 1070.415382] sd 6:0:0:0: [sde] Mode Sense: 34 00 00 00
[ 1070.415388] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418321] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 1070.418329] sde: sde1
[ 1070.479571] sd 6:0:0:0: [sde] Attached SCSI disk
[ 1070.893064] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.101016] usb 1-4: device descriptor read/64, error -71
[ 1071.413057] usb 1-4: device descriptor read/64, error -71
[ 1071.629053] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1071.837056] usb 1-4: device descriptor read/64, error -71
[ 1072.149043] usb 1-4: device descriptor read/64, error -71
[ 1072.365040] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1072.837029] usb 1-4: device not accepting address 3, error -71
[ 1072.949047] usb 1-4: reset high speed USB device using ehci_hcd and
address 3
[ 1073.422017] usb 1-4: device not accepting address 3, error -71
[ 1073.422112] usb 1-4: USB disconnect, address 3
[ 1073.537048] usb 1-4: new high speed USB device using ehci_hcd and address
4
[ 1073.745050] usb 1-4: device descriptor read/64, error -71
[ 1074.057127] usb 1-4: device descriptor read/64, error -71
[ 1074.273048] usb 1-4: new high speed USB device using ehci_hcd and address
5
[ 1074.477053] usb 1-4: device descriptor read/64, error -71
[ 1074.785052] usb 1-4: device descriptor read/64, error -71
[ 1075.001052] usb 1-4: new high speed USB device using ehci_hcd and address
6
[ 1075.465024] usb 1-4: device not accepting address 6, error -71
[ 1075.577045] usb 1-4: new high speed USB device using ehci_hcd and address
7
[ 1076.045054] usb 1-4: device not accepting address 7, error -71
[ 1076.045091] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1076.503968] usb 2-4: new full speed USB device using ohci_hcd and address
3
[ 1076.685064] usb 2-4: device descriptor read/64, error -62
[ 1076.969068] usb 2-4: device descriptor read/64, error -62
[ 1077.249072] usb 2-4: new full speed USB device using ohci_hcd and address
4
[ 1077.429063] usb 2-4: device descriptor read/64, error -62
[ 1077.713060] usb 2-4: device descriptor read/64, error -62
[ 1077.993042] usb 2-4: new full speed USB device using ohci_hcd and address
5
[ 1078.401051] usb 2-4: device not accepting address 5, error -62
[ 1078.577457] usb 2-4: new full speed USB device using ohci_hcd and address
6
[ 1078.985037] usb 2-4: device not accepting address 6, error -62
[ 1078.985070] hub 2-0:1.0: unable to enumerate USB device on port 4
ull speed USB device using ohci_hcd and address 6
[ 1078.985037] usb 2-4: device not accepting address 6, error -62
[ 1078.985070] hub 2-0:1.0: unable to enumerate USB device on port 4

Das heißt, die Platte wird zuerst noch erkannt und sogar (sde1) die
Partition noch angezeigt, aber dann verschwindet das Geràt ...

Mit einem 2.6.25er Kernel und Mandriva (32bit) làuft es aber. An denselben
Anschlüssen. Kernelbug?




da scheints wohl noch irgendein Problem mit der USB-Unterstützung im
neuen Kernel zu geben... Ubuntu 9.10 ist im Moment auch noch nicht für
den Produktiveinsatz gedacht, deswegen heißt es auch Alpha bzw. Beta.




,-O. Think Different!
O ; Sent on 20/06/2009 at 06:15 PM
`-O' GNU/Linux 2.6.28-13-generic [x86_64]

BOFH excuse #203:

Write-only-memory subsystem too slow for this machine. Contact your
local dealer.

Ähnliche fragen