Opensuse 11.0 und Adaptec SCSI Card 29320LPE

11/08/2009 - 15:36 von Thomas Weiner | Report spam
Hier làuft ein TX200S4r mit der Adaptec SCSI Card 29320LPE und Opensuse
11.0. Backup klappte über sieben Monate prima, dann kam es bei làngeren
Backups zu Ausfàllen (typischer Log-Eintrag s. unten). Cotroller und
Terminator wurden ohne Erfolg getauscht, Fujitsu geht nun davon aus,
dass der Treiber Schuld ist. Leider unterstützt Fujitsu Opensuse nicht,
deshalb gibt es dort nur angepasste Treiber für SLES (10 vermute ich).

Auch bei Adaptec finde ich nichts.

Hat jemand eine Idee, was ich tun könnte, oder kann das Log so deuten,
dass man mit Gewissheit sagen kann, es liegt an Hardware oder Treiber?

Vielen Dank und Grüße,
Thomas

Log (0:05 starte das Backup):
Aug 11 00:05:53 triangel kernel: st0: Block limits 1 - 16777215 bytes.
Aug 11 00:18:02 triangel syslog-ng[1909]: STATS: dropped 0
Aug 11 01:18:02 triangel syslog-ng[1909]: STATS: dropped 0
Aug 11 01:27:13 triangel kernel: nscd[3183]: segfault at 7f48b78f13bf ip
7f47ba4b6548 sp 40d44f20 error 4 in nscd[7f47ba4a6000+1d000]
Aug 11 02:18:03 triangel syslog-ng[1909]: STATS: dropped 0
Aug 11 03:18:03 triangel syslog-ng[1909]: STATS: dropped 0
Aug 11 04:13:04 triangel kernel: scsi 0:0:4:1: Attempting to queue an
ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Aug 11 04:13:04 triangel kernel: scsi0: At time of recovery, card was
not paused
Aug 11 04:13:04 triangel kernel: >>>>>>>>>>>>>>>>>> Dump Card State
Begins <<<<<<<<<<<<<<<<<
Aug 11 04:13:04 triangel kernel: scsi0: Dumping Card State at program
address 0x20 Mode 0x22
Aug 11 04:13:04 triangel kernel: Card was paused
Aug 11 04:13:04 triangel kernel: INTSTAT[0x0] SELOID[0x4] SELID[0x40]
HS_MAILBOX[0x0]
Aug 11 04:13:04 triangel kernel: INTCTL[0x80]:(SWTMINTMASK)
SEQINTSTAT[0x0] SAVED_MODE[0x11]
Aug 11 04:13:04 triangel kernel:
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
Aug 11 04:13:04 triangel kernel: SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI)
SCSIPHASE[0x1]:(DATA_OUT_PHASE)
Aug 11 04:13:04 triangel kernel: SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
Aug 11 04:13:04 triangel kernel: SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
Aug 11 04:13:04 triangel kernel: SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
Aug 11 04:13:04 triangel kernel: QFREEZE_COUNT[0x19]
KERNEL_QFREEZE_COUNT[0x19]
Aug 11 04:13:04 triangel kernel: MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff]
Aug 11 04:13:04 triangel kernel: SSTAT0[0x0]
SSTAT1[0x11]:(REQINIT|PHASEMIS) SSTAT2[0x0]
Aug 11 04:13:04 triangel kernel: SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
Aug 11 04:13:04 triangel kernel: LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x80]:(PACKETIZED)
Aug 11 04:13:04 triangel kernel: LQOSTAT0[0x0] LQOSTAT1[0x0]
LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
Aug 11 04:13:04 triangel kernel:
Aug 11 04:13:04 triangel kernel: SCB Count = 4 CMDS_PENDING = 2 LASTSCB
0x3 CURRSCB 0x2 NEXTSCB 0xff00
Aug 11 04:13:04 triangel kernel: qinstart = 8283 qinfifonext = 8283
Aug 11 04:13:04 triangel kernel: QINFIFO:
Aug 11 04:13:04 triangel kernel: WAITING_TID_QUEUES:
Aug 11 04:13:04 triangel kernel: Pending list:
Aug 11 04:13:04 triangel kernel: 2 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Aug 11 04:13:04 triangel kernel: 3 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Aug 11 04:13:04 triangel kernel: Total 2
Aug 11 04:13:04 triangel kernel: Kernel Free SCB list: 1 0
Aug 11 04:13:04 triangel kernel: Sequencer Complete DMA-inprog list:
Aug 11 04:13:04 triangel kernel: Sequencer Complete list:
Aug 11 04:13:04 triangel kernel: Sequencer DMA-Up and Complete list:
Aug 11 04:13:04 triangel kernel: Sequencer On QFreeze and Complete list:
Aug 11 04:13:04 triangel kernel:
Aug 11 04:13:04 triangel kernel:
Aug 11 04:13:04 triangel kernel: scsi0: FIFO0 Free, LONGJMP == 0x826b,
SCB 0x3
Aug 11 04:13:04 triangel kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Aug 11 04:13:04 triangel kernel: SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Aug 11 04:13:04 triangel kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0]
Aug 11 04:13:04 triangel kernel: SOFFCNT[0x5]
MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Aug 11 04:13:04 triangel kernel: HADDR = 0x00, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Aug 11 04:13:04 triangel kernel:
Aug 11 04:13:04 triangel kernel: scsi0: FIFO1 Free, LONGJMP == 0x80cf,
SCB 0x3
Aug 11 04:13:04 triangel kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Aug 11 04:13:04 triangel kernel: SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Aug 11 04:13:04 triangel kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0]
Aug 11 04:13:04 triangel kernel: SOFFCNT[0x5]
MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Aug 11 04:13:04 triangel kernel: HADDR = 0x00, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Aug 11 04:13:04 triangel kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Aug 11 04:13:04 triangel kernel: scsi0: LQISTATE = 0x1, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Aug 11 04:13:04 triangel kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Aug 11 04:13:04 triangel kernel: scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Aug 11 04:13:04 triangel kernel:
Aug 11 04:13:04 triangel kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Aug 11 04:13:04 triangel kernel: CCSCBCTL[0x4]:(CCSCBDIR)
Aug 11 04:13:04 triangel kernel: scsi0: REG0 == 0x2, SINDEX = 0x10a,
DINDEX = 0x10a
Aug 11 04:13:04 triangel kernel: scsi0: SCBPTR == 0x3, SCB_NEXT == 0x2,
SCB_NEXT2 == 0xff8b
Aug 11 04:13:05 triangel kernel: CDB a 0 1 0 0 0
Aug 11 04:13:05 triangel kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Aug 11 04:13:05 triangel kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends























































Aug 11 04:13:05 triangel kernel: scsi 0:0:4:1: Unable to deliver message
Aug 11 04:13:05 triangel kernel: scsi0: Command abort returning 0x2003
Aug 11 04:13:05 triangel kernel: st 0:0:4:0: Attempting to queue an
ABORT message:CDB: 0xa 0x0 0x1 0x0 0x0 0x0
Aug 11 04:13:05 triangel kernel: scsi0: At time of recovery, card was
not paused
Aug 11 04:13:05 triangel kernel: >>>>>>>>>>>>>>>>>> Dump Card State
Begins <<<<<<<<<<<<<<<<<
Aug 11 04:13:05 triangel kernel: scsi0: Dumping Card State at program
address 0x1d Mode 0x33
Aug 11 04:13:05 triangel kernel: Card was paused
Aug 11 04:13:05 triangel kernel: INTSTAT[0x0] SELOID[0x4] SELID[0x40]
HS_MAILBOX[0x0]
Aug 11 04:13:05 triangel kernel: INTCTL[0x80]:(SWTMINTMASK)
SEQINTSTAT[0x0] SAVED_MODE[0x11]
Aug 11 04:13:05 triangel kernel:
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
Aug 11 04:13:05 triangel kernel: SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI)
SCSIPHASE[0x1]:(DATA_OUT_PHASE)
Aug 11 04:13:05 triangel kernel: SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
Aug 11 04:13:05 triangel kernel: SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
Aug 11 04:13:05 triangel kernel: SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
Aug 11 04:13:05 triangel kernel: QFREEZE_COUNT[0x19]
KERNEL_QFREEZE_COUNT[0x19]
Aug 11 04:13:05 triangel kernel: MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff]
Aug 11 04:13:05 triangel kernel: SSTAT0[0x0]
SSTAT1[0x11]:(REQINIT|PHASEMIS) SSTAT2[0x0]
Aug 11 04:13:05 triangel kernel: SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
Aug 11 04:13:05 triangel kernel: LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x80]:(PACKETIZED)
Aug 11 04:13:05 triangel kernel: LQOSTAT0[0x0] LQOSTAT1[0x0]
LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
Aug 11 04:13:05 triangel kernel:
Aug 11 04:13:05 triangel kernel: SCB Count = 4 CMDS_PENDING = 2 LASTSCB
0x3 CURRSCB 0x2 NEXTSCB 0xff00
Aug 11 04:13:05 triangel kernel: qinstart = 8283 qinfifonext = 8283
Aug 11 04:13:05 triangel kernel: QINFIFO:
Aug 11 04:13:05 triangel kernel: WAITING_TID_QUEUES:
Aug 11 04:13:05 triangel kernel: Pending list:
Aug 11 04:13:05 triangel kernel: 2 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Aug 11 04:13:05 triangel kernel: 3 FIFO_USE[0x0]
SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x47]
Aug 11 04:13:05 triangel kernel: Total 2
Aug 11 04:13:05 triangel kernel: Kernel Free SCB list: 1 0
Aug 11 04:13:05 triangel kernel: Sequencer Complete DMA-inprog list:
Aug 11 04:13:05 triangel kernel: Sequencer Complete list:
Aug 11 04:13:05 triangel kernel: Sequencer DMA-Up and Complete list:
Aug 11 04:13:05 triangel kernel: Sequencer On QFreeze and Complete list:
Aug 11 04:13:05 triangel kernel:
Aug 11 04:13:05 triangel kernel:
Aug 11 04:13:05 triangel kernel: scsi0: FIFO0 Free, LONGJMP == 0x826b,
SCB 0x3
Aug 11 04:13:05 triangel kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Aug 11 04:13:05 triangel kernel: SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Aug 11 04:13:05 triangel kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0]
Aug 11 04:13:05 triangel kernel: SOFFCNT[0x5]
MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Aug 11 04:13:05 triangel kernel: HADDR = 0x00, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Aug 11 04:13:05 triangel kernel:
Aug 11 04:13:05 triangel kernel: scsi0: FIFO1 Free, LONGJMP == 0x80cf,
SCB 0x3
Aug 11 04:13:05 triangel kernel:
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
Aug 11 04:13:05 triangel kernel: SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Aug 11 04:13:05 triangel kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG)
SG_STATE[0x0] DFFSXFRCTL[0x0]
Aug 11 04:13:05 triangel kernel: SOFFCNT[0x5]
MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
Aug 11 04:13:05 triangel kernel: HADDR = 0x00, HCNT = 0x0
CCSGCTL[0x10]:(SG_CACHE_AVAIL)
Aug 11 04:13:05 triangel kernel: LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Aug 11 04:13:05 triangel kernel: scsi0: LQISTATE = 0x1, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Aug 11 04:13:05 triangel kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Aug 11 04:13:05 triangel kernel: scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Aug 11 04:13:05 triangel kernel:
Aug 11 04:13:05 triangel kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
Aug 11 04:13:05 triangel kernel: CCSCBCTL[0x4]:(CCSCBDIR)
Aug 11 04:13:05 triangel kernel: scsi0: REG0 == 0x2, SINDEX = 0x10a,
DINDEX = 0x10a
Aug 11 04:13:05 triangel kernel: scsi0: SCBPTR == 0x2, SCB_NEXT ==
0xff00, SCB_NEXT2 == 0xff8b
Aug 11 04:13:05 triangel kernel: CDB 0 0 0 0 0 0
Aug 11 04:13:05 triangel kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Aug 11 04:13:05 triangel kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends























































Aug 11 04:13:05 triangel kernel: (scsi0:A:4:0): Device is disconnected,
re-queuing SCB
Aug 11 04:13:05 triangel kernel: scsi0: Recovery code sleeping
Aug 11 04:13:09 triangel kernel: scsi0: Timer Expired (active 1)
Aug 11 04:13:09 triangel kernel: Recovery code awake
Aug 11 04:13:09 triangel kernel: scsi0: Command abort returning 0x2003
Aug 11 04:13:09 triangel kernel: st 0:0:4:0: Attempting to queue a
TARGET RESET message:CDB: 0xa 0x0 0x1 0x0 0x0 0x0
Aug 11 04:13:09 triangel kernel: scsi0: Device reset code sleeping
Aug 11 04:13:14 triangel kernel: scsi0: Device reset timer expired
(active 2)
Aug 11 04:13:14 triangel kernel: scsi0: Device reset returning 0x2003
Aug 11 04:13:14 triangel kernel: scsi 0:0:4:1: Attempting to queue a
TARGET RESET message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Aug 11 04:13:14 triangel kernel: scsi0: Device reset code sleeping
Aug 11 04:13:19 triangel kernel: scsi0: Device reset timer expired
(active 2)
Aug 11 04:13:19 triangel kernel: scsi0: Device reset returning 0x2003
Aug 11 04:13:19 triangel kernel: Recovery SCB completes
Aug 11 04:13:21 triangel syslog-ng[1909]: last message repeated 2 times
Aug 11 04:13:29 triangel kernel: scsi 0:0:4:1: Device offlined - not
ready after error recovery
Aug 11 04:13:29 triangel kernel: st0: Error 70000 (sugg. bt 0x0, driver
bt 0x0, host bt 0x7).
Aug 11 04:18:03 triangel syslog-ng[1909]: STATS: dropped 0
 

Lesen sie die antworten

#1 Arthur Erhardt
11/08/2009 - 15:48 | Warnen spam
Thomas Weiner wrote:
[...]
Log (0:05 starte das Backup):
Aug 11 00:05:53 triangel kernel: st0: Block limits 1 - 16777215 bytes.
Aug 11 00:18:02 triangel syslog-ng[1909]: STATS: dropped 0
Aug 11 01:18:02 triangel syslog-ng[1909]: STATS: dropped 0

Aug 11 01:27:13 triangel kernel: nscd[3183]: segfault at 7f48b78f13bf ip
7f47ba4b6548 sp 40d44f20 error 4 in nscd[7f47ba4a6000+1d000]


Das hier hat mit dem Adaptec Treiber nichts zu tun, sollte aber
nicht passieren. Sicher daß CPU/Chipset/Speicher heil sind?

Zum Rest: Einen anderen (also: anderer Typ, nicht nur Exemplar) SCSI
Adapter nehmen um zu vergleichen ist möglich? Wenn ja, dann probier
das mal. Wenns damit geht lags am Treiber.

[...]

Grüße,

Arthur


arthur dot erhardt at pit dot physik dot uni dash tuebingen dot de
*pgp key available* dg7sea

A physicist is an atom's way of knowing about atoms.

Ähnliche fragen