Probleme mit DVD-R DL Rohlingen

01/09/2011 - 17:23 von Clemens Schueller | Report spam
Hallo!

Gerade eben wollte ich einen DL Rohling mit einem ISO Image brennen:

Leider wurde der Rohling verbrannt - k3b meldet


+-
| Track 01: 2193 of 8105 MB written (fifo 99%) [buf 90%] 4,0x.
| cdrecord: Eingabe-/Ausgabefehler. write_g1: scsi sendcmd: no error
| CDB: 2A 00 00 11 22 B0 00 00 10 00
| status: 0x2 (CHECK CONDITION)
| Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
| Sense Key: 0x3 Medium Error, Segment 0
| Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
| Sense flags: Blk 0 (not valid)
| cmd finished after 23.849s timeout 200s
| cdrecord: A write error occured.
| cdrecord: Please properly read the error message above.
| write track data: error after 2299887616 bytes
| Writing time: 461.659s
| Average write speed 13,3x.
| Min drive buffer fill was 90%
| Fixating...
| cdrecord: faio_wait_on_buffer for writer timed out.
| Fixating time: 477.523s
| Track 01: data 8105 MB
| Total size: 8105 MB = 4150145 sectors
| Current Secsize: 2048
| WARNING: Phys disk size 16369920 differs from rzone size 0! Prerecorded disk?
| WARNING: Phys start: 196608 Phys end 16566527
| WARNING: Drive returns zero media size. Using media size from ADIP.
| Blocks total: 16369920 Blocks current: 16369920 Blocks remaining: 12219775
| Reducing transfer size from 64512 to 32768 bytes.
| cdrecord: fifo had 70315 puts and 70188 gets.
| cdrecord: fifo was 0 times empty and 20229 times full, min fill was 84%.
+-

+-
| [mente@mausquirl: ~]# cdrecord dev=1,0,0 -atip
| Cdrecord-ProDVD-ProBD-Clone 3.01a05 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 Joerg Schilling
| scsidev: '1,0,0'
| scsibus: 1 target: 0 lun: 0
| Linux sg driver version: 3.5.34
| Using libscg version 'schily-0.9'.
| Device type : Removable CD-ROM
| Version : 5
| Response Format: 2
| Capabilities :
| Vendor_info : 'HL-DT-ST'
| Identifikation : 'DVD-RAM GH22NS30'
| Revision : '1.02'
| Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
| Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
| Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
| Supported modes: PACKET SAO LAYER_JUMP
| cdrecord: Warning: Drive returned invalid buffer size.
| cdrecord: Warning: The DMA speed test has been skipped.
| book type: DVD-R, Version > 2.0x -> 3.0 (2.6)
| disc size: 120mm (0)
| maximum rate: Not specified (15)
| number of layers:2
| track path: Opposite Track Path (1)
| layer type: Rewritable Area (2)
| linear density: 0.293 µm/bit (1)
| track density: 0.74 µm/track (0)
| phys start: 196608 (0x30000)
| phys end: 16566527
| end layer 0: 2289503
| bca: 0
| phys size:... 16369920
| layer break at: 2092896
| L0 init status: 1
| L0 data areacap: 2092896
| Jump intervalsz: 0
| Jump LBA: 4294770688
| copyr prot type: 0
| region mgt info: 0
| cpm: 0
| cgms: 0
| last rma sector: 65535
| application code:2
| physical code: 145
| last rec address:16634122
| part v./ext code:6/0
| ind wr. power: 0
| wavelength code: 0
| write str. code: 00 33 70 00
| Manufacturer: 'MKM 03RD30 '
|
| Capacity Blklen/Sparesz. Format-type Type
| 4171711 2048 0x00 Unformated or Blank Media
| WARNING: Phys disk size 16369920 differs from rzone size 0! Prerecorded disk?
| WARNING: Phys start: 196608 Phys end 16566527
| WARNING: Drive returns zero media size. Using media size from ADIP.
+-

+-
| [mente@mausquirl: ~]# cdrecord --version
| Cdrecord-ProDVD-ProBD-Clone 3.01a05 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 Joerg Schilling
+-

+-
| [mente@mausquirl: ~]% uname -a
| Linux mausquirl 3.0.0-sabayon #1 SMP Sun Aug 28 10:03:53 UTC 2011 x86_64 Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz GenuineIntel GNU/Linux
+-


Der Rohling (ein Verbatim 8x) wurde mit 4x gebrannt.


Woran könnte es liegen, das er Rohling "versemmelt" wurde - any idea(s)?


GreetinX & Danke

Clemens
 

Lesen sie die antworten

#1 Joseph Terner
01/09/2011 - 17:28 | Warnen spam
On Thu, 01 Sep 2011 17:23:04 +0200, Clemens Schueller wrote:

Woran könnte es liegen, das er Rohling "versemmelt" wurde - any idea(s)?



Ausschuß. Entweder der Rohline (wahrscheinlich) oder Deine Hardware.

ciao, Joseph

Ähnliche fragen