TV-Karte unter SuSE10.3

14/10/2007 - 21:24 von Klaus-Karl Neumann | Report spam
'n Abend!

Seitdem ich SuSI10.3 installiert habe, funktioniert meine TV-Karte nicht
mehr. Die Karte selbst ist zwar etwas àlteren Datums (Hauppauge WinTV
PCI, BT878), hat aber unter den bisherigen SuSE-Installationen klaglos
und zuverlàssig ihren Dienst getan.

Ein "modprobe bttv" bringt:

Schnipp
Oct 14 21:16:04 suse kernel: bttv: driver version 0.9.17 loaded
Oct 14 21:16:04 suse kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Oct 14 21:16:04 suse kernel: bttv: Bt8xx card found (0).
Oct 14 21:16:04 suse kernel: bttv0: Bt878 (rev 2) at 0000:02:06.0, irq:
21, latency: 32, mmio: 0xdf000000
Oct 14 21:16:04 suse kernel: bttv0: detected: Hauppauge WinTV [card],
PCI subsystem ID is 0070:13eb
Oct 14 21:16:04 suse kernel: bttv0: using: Hauppauge (bt878)
[card,insmod option]
Oct 14 21:16:04 suse kernel: bttv0: gpio: en000000, out000000
infffffb [init]
Oct 14 21:16:04 suse kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line
init [5]
Oct 14 21:16:04 suse kernel: bt878 #0 [sw]: Test OK
Oct 14 21:16:04 suse kernel: msp3400 1-0040: MSP3410D-B4 found @ 0x80
(bt878 #0 [sw])
Oct 14 21:16:04 suse kernel: msp3400 1-0040: MSP3410D-B4 supports nicam,
mode is autodetect
Oct 14 21:16:04 suse kernel: tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
Oct 14 21:16:04 suse kernel: tveeprom 1-0050: Hauppauge model 61314, rev
A MB, serial# 1165004
Oct 14 21:16:04 suse kernel: tveeprom 1-0050: tuner model is Philips
FI1216 MK2 (idx 8, type 5)
Oct 14 21:16:04 suse kernel: tveeprom 1-0050: TV standards PAL(B/G)
(eeprom 0x04)
Oct 14 21:16:04 suse kernel: tveeprom 1-0050: audio processor is MSP3415
(idx 6)
Oct 14 21:16:04 suse kernel: tveeprom 1-0050: has no radio
Oct 14 21:16:04 suse kernel: bttv0: Hauppauge eeprom indicates model#61314
Oct 14 21:16:04 suse kernel: bttv0: using tuner=5
Oct 14 21:16:04 suse kernel: tuner 1-0061: type set to 5 (Philips PAL_BG
(FI1216 and compatibles))
Oct 14 21:16:04 suse kernel: bttv0: i2c: checking for MSP34xx @ 0x80...
found
Oct 14 21:16:04 suse kernel: bttv0: i2c: checking for TDA9875 @ 0xb0...
not found
Oct 14 21:16:04 suse kernel: bttv0: i2c: checking for TDA7432 @ 0x8a...
not found
Oct 14 21:16:04 suse kernel: bttv0: i2c: checking for TDA9887 @ 0x86...
not found
Oct 14 21:16:04 suse kernel: bttv0: registered device video1
Oct 14 21:16:04 suse kernel: bttv0: registered device vbi0
Oct 14 21:16:04 suse kernel: bttv0: PLL: 28636363 => 35468950 . ok
Schnapp

Sieht soweit eigentlich gut aus - jedenfalls stimmen die erkannten
Werte, wie Chip, Tuner, Sound, ...


Jetzt aber ein "modprobe bt878":

Schnipp
Oct 14 21:16:37 suse kernel: bt878: AUDIO driver version 0.0.0 loaded
Oct 14 21:16:37 suse kernel: bt878: Bt878 AUDIO function found (0).
Oct 14 21:16:37 suse kernel: ACPI: PCI Interrupt 0000:02:06.1[A] -> GSI
17 (level, low) -> IRQ 21
Oct 14 21:16:37 suse kernel: bt878_probe: card id=[0x13eb0070], Unknown
card.
Oct 14 21:16:37 suse kernel: Exiting..
Oct 14 21:16:37 suse kernel: ACPI: PCI interrupt for device 0000:02:06.1
disabled
Oct 14 21:16:37 suse kernel: bt878: probe of 0000:02:06.1 failed with
error -22
Oct 14 21:16:38 suse syslog-ng[2442]: STATS: dropped 0
Schnapp

???

Starte ich "kdetv", erscheint kurz das entsprechende Fenster, das
Fernsehbild bleibt kurz schwarz, dann irgendein grünes Strickmuster,
dann Chrash und kde-ChrashManager.


Was làuft das falsch? Wo muss ich dran drehen?


Have a nice day! kkn
 

Lesen sie die antworten

#1 Joern Abatz
15/10/2007 - 06:09 | Warnen spam
On Sun, 14 Oct 2007 21:24:22 +0200, Klaus-Karl Neumann wrote:

Oct 14 21:16:04 suse kernel: bttv0: registered device video1



Nicht video oder video0, sondern video1.

Jörn

Ähnliche fragen