V: Crucial RealSSD C300 SATA6G 64GB

05/10/2012 - 21:39 von Karl-Erik Jenß | Report spam
Hi,

verkaufe eine Crucial RealSSD C300 SATA6G mit 64GB in der OVP inkl.
Versand für 39 EUR. War im Notebook meines Vaters und wurde eher selten
benutzt. Sehr guter Zustand! Daten wurden per Security-Erase gelöscht.
Neueste Firmware ist drauf.

Gruß, Karl-Erik


S.M.A.R.T-Werte:

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-23-generic] (local build)
Copyrig.ht (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

START OF INFORMATION SECTION ==Model Family: Crucial RealSSD C300
Device Model: C300-CTFDDAC064MAG
Serial Number: 00000000104302FE7DE2
LU WWN Device Id: 5 00a075 102fe7de2
Firmware Version: 0007
User Capacity: 64.023.257.088 bytes [64,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Oct 5 19:27:03 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION ==SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 295) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 4) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail
Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail
Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 19
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 809
170 Grown_Failing_Block_Ct 0x0033 100 100 000 Pre-fail Always
- 0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always
- 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always
- 222
173 Wear_Levelling_Count 0x0033 100 100 000 Pre-fail Always
- 7
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always
- 0
181 Non4k_Aligned_Access 0x0022 100 100 000 Old_age Always
- 493923729485
183 SATA_Iface_Downshift 0x0032 100 100 000 Old_age Always
- 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always
- 0
189 Factory_Bad_Block_Ct 0x000e 100 100 000 Old_age Always
- 119
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always
- 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always
- 0
202 Perc_Rated_Life_Used 0x0018 100 100 000 Old_age
Offline - 0
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always
- 0

SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 1

ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 0 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was
active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 51 08 28 50 47 40 Error: ABRT at LBA = 0x00475028 = 4673576

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
61 00 08 28 50 47 40 00 01:39:00.000 WRITE FPDMA QUEUED
60 02 40 38 c7 8e 40 00 01:39:00.000 READ FPDMA QUEUED
60 03 08 50 4e 20 40 00 01:39:00.000 READ FPDMA QUEUED
60 00 08 18 77 78 40 00 01:39:00.000 READ FPDMA QUEUED
60 00 20 c0 78 78 40 00 01:39:00.000 READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 

Lesen sie die antworten

#1 Karl-Erik Jenß
05/10/2012 - 21:49 | Warnen spam
Link zu Bild und Beschreibung: http://geizhals.de/541509

Ähnliche fragen